ROLLS DEEP CYCLE BATTERIES BY SURRETTE
Specially designed batteries for marine and
inverter applications.


12-HHG-8D
12 volt, 275 amp hour 8D
Series 4000: 1300 cycles to 50%
7 year warranty
 

TECHNICAL SUPPORT, DESIGN CONSULTATION, SALES & INSTALLATION FOR ROLLS MARINE & OTHER DEEP CYCLE BATTERY SYSTEMS IS PROVIDED BY RSI MARINE PRODUCTS AND LAKE UNION BOAT REPAIR.
www.lakeunionboatrepair.com
 

North Americas Finest & Longest Lived Batteries

Rolls batteries will give you better performance than you have ever known.  What’s more, you will avoid 2 or even 3 battery change outs in a single Rolls life cycle.

Rolls’ three objectives:  One, build deep cycle batteries that perform as well as it is possible.  Two, build batteries that last 2 to 3 time longer than most brands, often from 15 to 20 years.  Three, support you with a great warranty.  Rolls will work with any battery technician, anywhere, to protect your security in an up to 10 year warranty.  If you want the best, you want Rolls/Surrette.


 

MODULAR SERIES 4000 BATTERIES

Rolls, easy in, easy out, modular batteries are available in either 325 or 375 amp hour packages. The 6 individual cells come in a hold down box with lid.  Both sizes are available in the foot print of either an 8D box or a pair of group 27s.  Hydrocaps are included.  Hydrocaps convert hydrogen gas back into water and oxygen, returning the water back to the battery.  Hydrocaps radically reduce battery watering and can be ordered optionally for most Rolls batteries.

 


12MD325M shown



12HHG325M, 325AH (8D)  
12EHG375M, 375AH (8D)
12MD325M, 325 AH (Grp 27 X 2) 
12MD375M, 375AH (Grp 27 X 2)
All models will deliver 1300 cycles to 50%. 
7 year warranty.


825 AMP HOURS IN THE FOOTPRINT OF 2 8D BATTERIES

Rolls builds many designs for maximizing amp hours in available space, like the 825 amp hour, 6 volt, 6CS25PM. While 18 inches tall, this battery occupies the same footprint as an 8D. And, the 6CS25PM disassembles into 3, 100 lb easy in, easy out cells. Two in series will give you 825 amp hours at 12 volts.  Parallel with a 2nd set for 1650 amps; ideal for even the largest inverter loads. 

To find out more about Rolls batteries, contact RSI or visit www.surrette.com


6CS25PM
6 volt, 825 amp hour, 
dual container modular
Series 5000, 3300 cycles to 50%
10 year warranty

   
   

Rolls T12-136, 12 volt, 136 amp hour, battery
The ultimate electric troll motor, sport fisher and sailboat battery.
13 3/16 x 6 ¾  x 11 ¼ H.  90 lbs. 1300 cycles to 50%.
4 in parallel = 544 AH @ 20hr. rate.

 

NEW:  Rolls EIW-250, high performance golf cart.
250 amp hours, 1300 cycles to 50%.
10 ¼  x 7 x 11 3/8, 79 lbs.

4 in series/parallel = 500 AH @ 20hr. rate.

 

 

 WHY BUY ROLLS DEEP CYCLE BATTERIES?

  • ROLLS SERIES 4000 BATTERIES LAST 2 TO 3 TIMES LONGER THAN COMPETING BRANDS: 1300 CYCLES TO 50%, 7 YR. WARRENTY. 

  • ROLLS SERIES 5000 BATTERIES LAST 3 TO 5 TIMES LONGER THAN COMPETING BRANDS: 3300 CYCLES TO 50%, 10 YR. WARRENTY. 

  • ROLLS PLATES ARE MUCH THICKER, HOLDING FAR MORE ACTIVE MATERIAL WHICH MEANS MORE CYCLES, BETTER PERFORMANCE. 

  • HEAVY PLATE GRID CONSTRUCTION RESISTS DAMAGING EFFECTS OF THE GRID CORROSION ASSOCIATED WITH EACH RECHARGE. 

  • ENCAPSULATED PLATES ELIMINATE THE MUD CHAMBER IN THE BATTERY BOTTOM.  ROLLS PLATES, SURROUNDED BY 3 LAYERS OF ABSORBED GLASS MAT, ARE TOTALLY ENCAPSULATED IN MICRO POROUS POLYETHYLENE ENVELOPES AND SIT ON THE BOTTOM OF THE BATTERY.  UNLIKE COMPETING BATTERIES WITH HANGING PLATES, OVERALL CONSTRUCTION PREVENTS HEAT FROM WARPING PLATES SO ACTIVE MATERIAL DOES NOT BREAK OFF OR SLUF INTO THE BOTTOM OF THE BATTERY. 

  • ROLLS BATTERIES ARE MORE FORGIVING.   NO MUD CHAMBER MEANS MORE PLATE (MORE AMPS) IN ANY BCI SIZE CASE AND ALLOWS MORE LIQUID RESERVE OVER THE TOPS OF THE PLATES. 

  • ROLLS PLATES, SITTING ON THE BATTERY BOTTOM, ARE STABILIZED AGAINST POUNDING AND VIBRATION. 

   

Rolls Battery Service in Seattle at Lake Union Boat Repair

FOR MARINE ELECTRONICS INSTALLATIONS IN SEATTLE, VISIT:
 www.lakeunionboatrepair.com
LAKE UNION BOAT REPAIR
One of Seattle’s favorite boat yards specializing in all aspects of yacht repair, renovations, and installations. 
Re-fit at Lake Union Boat Repair.

Copyright © RSI Marine Products, Inc. all rights reserved.
Phone (206) 283-9868  Fax (206) 283-9236
Email: info@rsimarineproducts.com